3 4 & 5 Die Headers
10mm Sacma Model SP250 4-Die 5-Station Progressive Header Machine, Re:24190
Model: SP150
Manufacturer: Sacma
Manufacturer: Sacma
Diameter range | 8mm |
No. of dies | 4 |
No. of stations | 5 |
Output (pcs/min) | 350 |
Shaft length under head | 45mm |
Cutting length | 65mm |
Press power | 48t |
Weight | 8,700 kgs |
Motor power | 35 kW |
16 x 500mm (5/8" x 20") Toko TL-400 Extra Long Work Open Die Double Stroke Cold Header w/Long-Feed Straightener, Re:23864
Model: TL-400
Manufacturer: Toko
Manufacturer: Toko
Built new in 1990, this Extra Long Work Open Die Cold Header will produce parts up to 500mm under head length.
Cutoff dia rating | 16mm (0.629") |
Max cutoff length | 550mm (21.653") |
Max underhead length | 500mm (19.685") |
Min underhead length | 150mm (5.905") |
Quill diameter | 45mm (1.771") |
Die block length | 150mm (5.905") |
Ram stroke | 375mm (14.764") |
Production rate | 32 ppm |
Main motor power | 30kW (40hp) |
Machine net weight | 15,000 kgs (33,000 lbs) |
Truly a uniquely designed machine, it is equipped with the following features:
• Multiple roll two-plane straightener (floor mounted)
• Enclosed bushing type cutoff
• Unique TOKO Open Die System
NOTE: Dies only a few inches long produce parts the full length range of the machine's capacity.
• Quick Length Adjustment Feature
NOTE: Length changes can be made by making a simple adjustment And, when using the same diameter wire, the same set of dies will produce parts the full length range of the machine's capacity.
• Automatic lubrication system
• Flywheel guards
• Oil catch base under entire machine
• Dual-grooved feed rolls
The machine is currently being refurbished as follows:
• Refitting of the ram
• Refitting the punch slide
• Checking main journals
• Refitting of the connecting rod to the crankshaft
• Refitting of the connecting rod to the ram
• Reworking the cams and cam followers
• Reworking of the feed mechanism and components
• Installation of a complete New lubrication system
• Replace all lubrications lines, fittings, terminal distribution blocks,flexible lines, etc.
• Checking and making any necessary repairs to the electrical system and operators control station
In addition, a number of parts were made brand new including one cross shaft, one side shaft, various shifter parts, two large locking nuts, and other miscellaneous parts.
The below photos were taken prior to removal from the plant. The machine will be in Excellent Condition once refurbishing is completed.
• Multiple roll two-plane straightener (floor mounted)
• Enclosed bushing type cutoff
• Unique TOKO Open Die System
NOTE: Dies only a few inches long produce parts the full length range of the machine's capacity.
• Quick Length Adjustment Feature
NOTE: Length changes can be made by making a simple adjustment And, when using the same diameter wire, the same set of dies will produce parts the full length range of the machine's capacity.
• Automatic lubrication system
• Flywheel guards
• Oil catch base under entire machine
• Dual-grooved feed rolls
The machine is currently being refurbished as follows:
• Refitting of the ram
• Refitting the punch slide
• Checking main journals
• Refitting of the connecting rod to the crankshaft
• Refitting of the connecting rod to the ram
• Reworking the cams and cam followers
• Reworking of the feed mechanism and components
• Installation of a complete New lubrication system
• Replace all lubrications lines, fittings, terminal distribution blocks,flexible lines, etc.
• Checking and making any necessary repairs to the electrical system and operators control station
In addition, a number of parts were made brand new including one cross shaft, one side shaft, various shifter parts, two large locking nuts, and other miscellaneous parts.
The below photos were taken prior to removal from the plant. The machine will be in Excellent Condition once refurbishing is completed.
3/16" x 3" Hartford 0-400 Hi-Speed Horizontal Flat Die Thread Roller Re:23520
Model: 0-400
Manufacturer: Hartford
Manufacturer: Hartford
Very Good Working Condition complete with Floor Mounted Vibratory Hopper Feeding System.
Max rated screw diameter | 0.188" |
Min screw diameter | 0.086" |
Max thread length | 2.500" |
Max shank length | 3.000" |
Die pocket depth | 2.625" |
Main motor power | 5.0hp |
Machine width | 60.0" |
Machine length | 72.0" |
Net weight | 2,800.0lbs |
Production per minute | 400 ppm |
Also equipped as follows:
• Automatic lubrication system
• Separate coolant system
• Handwheel for manual operation during setup
• Feed rail air vibrator for uninterrupted feed
• Triple Air Jet Transfer mechanism
• Anti-friction bearing wrist pin and crank pin
• Crank pin "match" adjustment - no shimming necessary
• 230/460/3/60 Electrics
• Automatic lubrication system
• Separate coolant system
• Handwheel for manual operation during setup
• Feed rail air vibrator for uninterrupted feed
• Triple Air Jet Transfer mechanism
• Anti-friction bearing wrist pin and crank pin
• Crank pin "match" adjustment - no shimming necessary
• 230/460/3/60 Electrics
3/16" x 3" Hartford 0-500 Hi-Speed Horizontal Flat Die Thread Rollers Re:23515 - 19 (5 Available)
Model: 0-500
Manufacturer: Hartford
Manufacturer: Hartford
All are in Very Good Working Condition complete with Floor Mounted Vibratory Hopper Feeding Systems.
Max rated screw diameter | 0.188" |
Min screw diameter | 0.086" |
Max thread length | 2.500" |
Max shank length | 3.000" |
Die pocket depth | 2.625" |
Main motor power | 5.0hp |
Machine width | 60.0" |
Machine length | 72.0" |
Net weight | 2,800.0lbs |
Production per minute | 500 ppm |
Also equipped as follows:
• Automatic lubrication system
• Separate coolant system
• Handwheel for manual operation during setup
• Feed rail air vibrator for uninterrupted feed
• Triple Air Jet Transfer mechanism
• Anti-friction bearing wrist pin and crank pin
• Crank pin "match" adjustment - no shimming necessary
• 230/460/3/60 Electrics
• Automatic lubrication system
• Separate coolant system
• Handwheel for manual operation during setup
• Feed rail air vibrator for uninterrupted feed
• Triple Air Jet Transfer mechanism
• Anti-friction bearing wrist pin and crank pin
• Crank pin "match" adjustment - no shimming necessary
• 230/460/3/60 Electrics
31mm Sacma Model SP660AL 5-Die 6-Station Progressive Header Machines, Re:24188
Manufacturer: Sacma
8mm Sacma Model SP150 4-Die 5-Station Progressive Header Machine, Re:24189
Model: SP150
Manufacturer: Sacma
Manufacturer: Sacma
Diameter range | 8mm |
No. of dies | 4 |
No. of stations | 5 |
Output (pcs/min) | 350 |
Shaft length under head | 45mm |
Cutting length | 65mm |
Press power | 48t |
Weight | 8,700 kgs |
Motor power | 35 kW |
23.01.2013. 14:33