Boltmakers
5/8" National 10L4 Hi-Speed 4-Die Boltmaker Re:23544
Model: 10L4
Manufacturer: National
Manufacturer: National
Still installed, this Boltmaker is available for immediate inspection and delivery.
Max cutoff diameter | 0.680" |
Max cutoff length | 5-3/4" |
Max underhead length | 4-3/8" |
Min underhead length | 1-1/2" |
Main motor power | 75hp |
Floor space | 236" L x 131" W |
Machine height | 117" |
Production rate | 160ppm |
Net weight (Approx) | 74,000 lbs |
Still installed, this Boltmaker is available for immediate inspection and delivery.
It comes with an assortment of tooling including transfer fingers, feed rolls, solid bushing cutters and all machine specific tooling except for heading dies.
Any associated spare parts will be included.
It comes complete with the following:
• Solid Bushing Cutoff system
• IFO Transfer system
• Full safety/sound enclosure
• Four forming dies plus cutoff station
• Flat die thread roller w/cam-controlled separator, injector & pusher
• Separate pointer w/short pointer feed tube & carbide cutters
• Individual finger timing transfer system w/gearless transfer
Still under power, it may be inspected anytime on request.
It comes with an assortment of tooling including transfer fingers, feed rolls, solid bushing cutters and all machine specific tooling except for heading dies.
Any associated spare parts will be included.
It comes complete with the following:
• Solid Bushing Cutoff system
• IFO Transfer system
• Full safety/sound enclosure
• Four forming dies plus cutoff station
• Flat die thread roller w/cam-controlled separator, injector & pusher
• Separate pointer w/short pointer feed tube & carbide cutters
• Individual finger timing transfer system w/gearless transfer
Still under power, it may be inspected anytime on request.
3/4" x 8" National 4-Die Boltmaker Re:23543
Manufacturer: National
Still installed, this Boltmaker is available for immediate inspection and delivery.
Max cutoff dia | 1" in 85,000 PSI material |
Max rated bolt diameter | 3/4" |
Max cutoff length | 10" |
Min cutoff length | 1-1/2" |
Max underhead length | 8" |
Min underhead length | 1-1/2" |
Max production rate | 50 ppm |
Floor space | 293" L x 140" W |
Main motor power | 100 hp |
Machine net weight | 140,000 lbs |
It comes with an assortment of tooling including transfer fingers, feed rolls, solid bushing cutters and all machine specific tooling except for heading dies.
Any associated spare parts will be included.
Equipped with the following:
• Solid bushing type cutoff system
• Heat-treated alloy-steel bedframe
• Over-arm heading ram
• Individually adjustable punch holders
• Safety bar, for setup, between heading slide and die block
• Pointing station
• Flat-die thread rolling station
• Recirculating oil lubrication system
• Separate roll thread coolant system
• Functionally located operator adjustments and controls
• Operator's push button control station
• Electrics
Still under power, it may be inspected anytime on request.
Any associated spare parts will be included.
Equipped with the following:
• Solid bushing type cutoff system
• Heat-treated alloy-steel bedframe
• Over-arm heading ram
• Individually adjustable punch holders
• Safety bar, for setup, between heading slide and die block
• Pointing station
• Flat-die thread rolling station
• Recirculating oil lubrication system
• Separate roll thread coolant system
• Functionally located operator adjustments and controls
• Operator's push button control station
• Electrics
Still under power, it may be inspected anytime on request.
28.01.2013. 09:10