Upsetters
1" National High Duty w/InductoTherm Induction Heater
Manufacturer: National
This Upsetter comes with an IHS InductoTherm Multi-Station Induction Heating System. Also available are three (3) Landis 2-Spindle Cut Threaders, a .75", a 1.5" and a 2". In addition, we have a Landis Chaser Grinder to offer. Inspect at our NorthEast USA Warehouse.
Reference# | 24486 |
Manufacturer | National |
Model | 1 |
Rated Diameter Capacity | 1" |
Stroke | 8.5" |
Grip Opening | 2-3/16" |
Gather | 2-9/16" |
Hold | 1" |
Tool & Die space | 10.5" |
Length of Die Space | 7" |
Height of die space | 8" |
Thickness of each die | 4.5" |
Machine Net Weight | 16,500 lbs |
1,000 ton Etchells MultiForge MF40/1000 S.P.H.
Manufacturer: Etchells
This Heavy Duty Vertical Upsetter was primarily designed by Etchells to form AeroSpace Engine Turbine Blades and more specifically to form the ends of Jet Engine Turbine Blades up to 13" wide with a 2" thick upset on the ends. It was originally purchased and used by Rolls Royce.
Reference | 24400 |
Manufacturer | Etchells |
Model | MF40/1000 S.P.H. MultiForge |
Forging (Upsetting) tonnage | 1,000 tons |
Vertical slide gripping tonnage | 1,000 tons |
Grip opening | 150mm (5.9") |
Ram stroke | 200mm (8") |
Strokes per minute (variable) | 30-60 |
Gripping tool area width | 762mm (30") |
Upper/lower tool area depth | 560mm (22") |
Upper/lower die thickness | 200mm (7.875") |
Floor space | 19 feet long x 13 feet wide |
Net weight | 110 tons (240,000 lbs) |
Completed with:
• Top & Bottom Die Heaters
• Four (4) Tie-Rod Construction
• Horizontally opposed griping dies
• Multi-Directional adjustment by wedges
• Flat-Base Construction
• Overload protection
• Adjustable front stock gauging device
• Easy tooling adjustment & die changing
• Operator's Push-Button Controls Pendant style controls
• Complete electrical & electronic systems w/480V /3/ 60 electric service
• Variable Speed Inverter
• Air Clutch & Brake System
• Lubrication system
• Wichita flywheel shaft clutch #ATD 248
• Wichita flywheel shaft brake #ATD 236 L.I.
& bull; Wichita camshaft clutch #ATD 336
• Wichita camshaft brake #ATD 218
• Grip Slide Wedge Locking System with lock/unlock motor
In the 1990's it was sold to GE Aviation and fully rebuilt and upgraded by Etchells before being installed in one of GE's USA plant sites. It was only used light and intermittently thereafter and was recently purchased by TrueForge. It is truly in Excellent condition.
• Top & Bottom Die Heaters
• Four (4) Tie-Rod Construction
• Horizontally opposed griping dies
• Multi-Directional adjustment by wedges
• Flat-Base Construction
• Overload protection
• Adjustable front stock gauging device
• Easy tooling adjustment & die changing
• Operator's Push-Button Controls Pendant style controls
• Complete electrical & electronic systems w/480V /3/ 60 electric service
• Variable Speed Inverter
• Air Clutch & Brake System
• Lubrication system
• Wichita flywheel shaft clutch #ATD 248
• Wichita flywheel shaft brake #ATD 236 L.I.
& bull; Wichita camshaft clutch #ATD 336
• Wichita camshaft brake #ATD 218
• Grip Slide Wedge Locking System with lock/unlock motor
In the 1990's it was sold to GE Aviation and fully rebuilt and upgraded by Etchells before being installed in one of GE's USA plant sites. It was only used light and intermittently thereafter and was recently purchased by TrueForge. It is truly in Excellent condition.
5" Hill Acme Upset Forging Machine (Upsetter)
Manufacturer: Hill Acme
Still installed, this upsetter is in very good working condition and available for immediate inspection and delivery. Equipped with Air Clutch and Electrical Controls
Reference | 23801 |
Manufacturer | Hill Acme |
Model | XN |
Rated bar diameter | 5" |
Die depth | 29" |
Die width | 17" |
Die length | 26" |
Stroke | 15" |
Header slide length | 104" |
Main motor | 75hp |
Upsetting force | 1,100 tons |
Gripping force | 500 tons |
Net weight | 202,500 lbs |
National 1-1/2" High-Duty Upset Forging Machine (Upsetter) - with A/C & Brake & Auto Tong Feed, 1974
Manufacturer: National
Serial number 25135 - built new in 1974 in Tiffin, Ohio. In very good condition, this machine is located at our Massachusetts USA warehouse where it may be inspected on request.
Reference | 24152 |
Manufacturer | National |
Model | 1.5 |
Rated Diameter Capacity | 1.5" |
Stroke | 9.25" |
Grip Opening | 2.6875" |
Gather | 4" |
Hold | 1.25" |
Length of die space | 10.25" |
Height of die space | 12" |
Tool & Die space | 14.25" |
Thickness of each die | 5.625" |
Net weight | 27,000 lbs |
Equipped with:
• Auto Tong Feed System
• Air clutch & brake,
• Over-arm suspended heading and gripping slides
• Automatic Pressurized Trabon Lubrication System
• Adjustable motor platform
• V-belts and motor sheave
• Operators Push-Button Control Station
• Machine guarding
• Auto Tong Feed System
• Air clutch & brake,
• Over-arm suspended heading and gripping slides
• Automatic Pressurized Trabon Lubrication System
• Adjustable motor platform
• V-belts and motor sheave
• Operators Push-Button Control Station
• Machine guarding
National 1-1/2" High-Duty Upset Forging Machine (Upsetter) - w/AC & Brake and an IHS InductoTherm Heater
Manufacturer: National
We have two of these available and each comes with an IHS InductoTherm Multi-Station Induction Heating System. Also available are three (3) Landis 2-Spindle Cut Threaders, a .75", a 1.5" and a 2". In addition, we have a Landis Chaser Grinder to offer. Inspect at our NorthEast USA Warehouse.
Reference | 24485 |
Manufacturer | National |
Model | 1.5 High Duty |
Rated Diameter | 1.5" |
Ram Stroke | 9.25" |
Grip Opening | 2.6875" |
Gather | 4" |
Hold | 1.25" |
Tool & die space | 14.25" |
Length of die space | 10.25" |
Height of Die Space | 12" |
Thickness of each die | 5.625" |
Machine Net Weight | 24750 lbs |